What Is Blown-In Insulation?
Blown-in insulation is a loose-fill material made of fiberglass or cellulose that’s blown into wall cavities, attics, and crawl spaces using specialized blowing equipment.
Because this material is made of tiny, lightweight fiber particles, it easily conforms to irregular shapes, fills around obstructions, and reaches areas batts cannot.
Cellulose
Made largely from recycled paper, cellulose is treated with borate for fire, mold, and pest resistance. Its higher density lets it dense-pack into wall cavities and around obstructions, giving strong cavity fill. It does settle over time; good installers account for this by applying it at the right density, and it compacts further if it gets wet.
Fiberglass loose-fill
Lighter than cellulose, fiberglass loose-fill puts less load on ceilings and is a practical choice for open attic floors. Being inorganic and non-porous, it resists moisture; it neither absorbs nor holds water. It settles less than cellulose, though its lower weight lets air move through it more easily, so consistent depth matters.
Cellulose or Fiberglass for Your Home
Cellulose and fiberglass insulation both have advantages and disadvantages. Factors such as material content, R-value per inch, density, and behavior when wet can help you make an informed decision for your home.
| Cellulose Insulation | Fiberglass Loose-fill Insulation | |
|---|---|---|
| Material | Recycled materials that have been treated with borate for fire, mold and pest resistance. | Made primarily from recycled glass spun into tiny fibers. |
| R-Value per inch | R-3.2 to R-3.8 per inch | R-2.2 to R-2.7 per inch |
| Density and cavity fill | Although it has a loose-fill density, this type of insulation can be densely packed into wall cavities and ceilings. | A lightweight material that allows air to move more easily through the loose material. It fills wall cavities well if installed by a skilled fiberglass insulation installer with blower equipment. |
| Behavior when wet | This material settles and compacts down even further when exposed to moisture. | This type of insulation is non-porous and inorganic. It neither absorbs nor holds water. |
Where We Install Blown-In Insulation
Attic Insulation
A major source of heat loss in New York homes. Blown-in insulation helps fill gaps and uneven spaces to create a more consistent thermal barrier.
Wall Cavities
When installed in an existing wall cavity, it reduces heat transfer between your home’s interior and exterior.
Crawl Spaces & Hard-to-Reach Areas
Installation in a crawl space helps reduce heat loss through floors. This material’s loose-fill nature makes it ideal for filling in irregular or difficult-to-access spaces where batts cannot be installed.
Blown-In Insulation for Existing Walls
Older New York homes were often built with little or no insulation inside their walls. This made it harder to maintain a comfortable temperature indoors. With blown-in insulation for existing walls, we can upgrade your home without removing the finished walls.
We create small access holes between the studs to densely pack insulation into your wall cavities. After installation, we patch every opening to match the original surface.
Our process offers an efficient way to improve your home’s insulation with minimal disruption and without demolition.
Blown-In Insulation Removal
If your insulation has moisture damage, mold, pest contamination or has become heavily compacted, we may need to remove it before we can install new material.
Our blown-in insulation removal process includes containment, HEPA extraction and proper disposal. Once the space is clean, we can move forward with installation meant to achieve your targeted R-value and restore your home’s thermal performance.
Our Installation Process
At AI Greenhome, we follow a simple step-by-step process when installing blown-in insulation in New York homes. From the initial inspection to the final walkthrough, we take care of every step and stay in communication with you throughout the process.
Free Home Energy Assessment
We check your home’s current insulation levels, look for areas of potential energy loss, and recommend solutions based on our findings.
Air Sealing First
Before we get started, our blown-in insulation contractor seals gaps or openings that may let air in and impact the material’s performance.
Blown-In Installation
Our certified crew uses specialized blowing equipment to install your new insulation uniformly and at the right depth.
Final Inspection and Cleanup
Before we go, our team verifies the insulation’s depth, cleans up your space, and explains what was done.
Insulation Works Best With the Rest of the System
Blown-in insulation fills cavities, but it doesn’t seal every leak on its own. Some areas may also need spray foam insulation or air sealing first.
Insulation works best when it’s part of the rest of the system, whether that’s additional attic insulation, duct sealing, or another solution.
Our initial assessment helps determine what combination of solutions fit your home.
Instant Rebates Available
Based on eligibility and location
- HVAC Systems
- Insulation Upgrades
- Energy Audits
- Heat Pumps
Maximize Available NY Energy Incentives
As a NYSERDA-approved blown-in insulation contractor participating in Con Edison and PSEG Long Island programs, AI Greenhome helps homeowners explore available rebates and utility incentives for eligible insulation upgrades.
Eligibility for incentives depends on your address, property type, utility provider, project scope, and available funding. A Free Home Energy Assessment can help identify programs that may apply. Final eligibility and incentive amounts are determined by the program administrator.
- NYSERDA Approved
- Con Edison Partner
- PSE&G Eligible

Income-Qualified Insulation Programs
Special programs are available to make insulation upgrades more accessible to certain residents.
Income-eligible homeowners may qualify for partial or full coverage of approved energy-efficiency improvements through EmPower+.
Eligibility depends on several factors, and acceptance is not guaranteed. Our free energy assessment can help determine whether you qualify.
NYC Boroughs and Nearby Areas We Serve
AI Greenhome serves all five boroughs of New York City and nearby Long Island. Whether you’re in Manhattan, Brooklyn, the Bronx, Queens, Staten Island or on Long Island, our team is ready to help improve your home’s comfort and efficiency with properly installed insulation.

FAQs
Do you have questions about our process or the advantages of Blown-in insulation? Our team provides detailed answers below.
That depends on the home. Cellulose is often preferred for irregular wall cavities because it fills voids and gaps. Standard wall spaces may benefit from fiberglass.
Yes, especially cellulose. Proper installation takes settling into account, so the material is applied at the appropriate density.
Yes. It can be installed in existing walls using a drill-and-fill process. We create small access holes between studs, fill the cavity and patch the wall afterward.
Not always. Removal may be recommended if your current insulation has moisture damage, pest contamination, mold or severe deterioration that could impact the new insulation.
The recommended R-value depends on your location and home’s construction. Our team will assess your space and recommend an appropriate target R-value.
That depends on your home’s insulation levels, size, and the areas we’re treating. Some projects are completed in a day. Others require more time.
Not always. But it is often an important first step in the process. It prevents unwanted air from leaking through and helps your new insulation perform more efficiently.
Depending on your location and the scope of the project, you may qualify for federal, state or utility rebate programs. Our team can help identify available programs.
Yes. We serve only single-family and 2-4-family homes.
Ready for a Warmer, Quieter Home?
Contact us today to schedule your free home energy assessment. Our team will help you find the right option for your home’s blown-in insulation.
